Standard Mobile

A great entry level solution for low-risk workers, those on a budget or infrequent lone workers.

Our standard mobile phone solution provides a simple and affordable lone worker protection solution. It’s perfect for employees to carry out safe and well checks or raise Red Alerts. This user-friendly solution utilises existing mobile phones or landlines.

The service also allows the user to leave a voice message (Amber Alert) on Peoplesafe’s system with details of an appointment, and set a timer, which if not cancelled, will automatically raise an alarm. The memo will be made available to our Controllers providing them with vital information in an emergency.

Red Alert

A designated button will immediately open an audio channel to the ARC.

Amber Alert

Users connect to the system to describe location, activity and time of completion.


  • Two-way audio communications
    • Pre-alert system with timers
      • Dedicated panic button
        • 24/7 monitoring
          • Available on standard mobile phones
            • Unique PIN access from any landline.

Risk Factors

  • Verbal abuse/threats — NOT suitable
    • Physical abuse/threats — OK
      • Man Down: user activated — NOT suitable
        • Man Down: device activated — NOT suitable
          • Safe and well check — suitable
            • Performance without mobile network — NOT suitable

Try Standard Mobile for 30 Days Free

Interested? Why not try our Standard Mobile service for a whole month free of charge. There's no commitment or purchase necessary. Just click below to get started today

Get Started Today

PIN Access From Landline

A unique PIN can be assigned to each user, enabling access to our system from any landline. Dialling a dedicated Peoplesafe number will prompt the user to enter their PIN with the keypad. Once approved, the user will have full access to the standard mobile service.

Pairing With Spot Gen3

Lone workers can now operate seamlessly between network coverage and no network cover, by combining our standard mobile solution with the Spot Gen3.

If a user sets an amber alert on their mobile and moves into an area with no network coverage, they can cancel or extend their timer using their Spot device.

BS 8484 Non Compliance

Our standard mobile solution does not fully comply with BS 8484:2016 (the British Standard for suppliers of device/app based lone worker services). Here’s a brief overview of functionality:

  • Audio Red Alert capability — Yes, two-way voice
  • Red Alert call will keep trying if unsuccessful — No, numbers need to be redialled
  • Red Alert call is confirmed as answered — No, 2G mobiles cannot be configured this way
  • Operator can dial in to the device — No, incoming calls must be accepted by user
  • Check-in: Amber Alert capability — Yes, timer is at the Alarm Receiving Centre
  • Location of device is available — Via Amber Alert message only
  • Sufficient battery life and low battery warning — Phone-based low battery warning
  • Signal strength indication — Yes
  • Minimise causes of false alarms — Device and service issue